Metal Roofing · Northwest Washington
Metal roofing — the fifty-year answer to Northwest weather.
Standing seam and metal panel roofs shed rain, moss, and fir needles like nothing else, sourced from the Northwest's own mills — Taylor Metal and Nu-Ray — and installed with the flashing discipline metal demands.
- ✓ Standing Seam & Panel
- ✓ Moss Can't Root
- ✓ PNW-Made Panels
Request a free, no-obligation estimate — profiles and gauges matched to your roof, quoted honestly against architectural shingles.
What Metal Solves
A 50-Year Horizon
Standing seam with a quality finish is realistically the last roof the house needs — one install, decades of quiet.
Moss Has Nowhere to Root
Smooth panels shed needles and debris before they compost — the Northwest's shingle killer simply doesn't apply.
Wind Resistance
Interlocked panels over concealed clips give storms nothing to peel at — the right roof for exposed and coastal sites.
Sheds Rain and Snow
Water and the occasional lowland snow slide off steep metal instead of ponding, backing up, or ice-damming.
Non-Combustible
Metal doesn't ignite — meaningful for island and rural homes where fire response takes longer.
Custom-Length Panels
Panels rolled to your roof's exact dimensions by regional mills — fewer laps, fewer opportunities for leaks.
Finish Warranties
Factory-baked finishes with decades-long fade and chalk warranties — full manufacturer coverage.
Recyclable, Not Landfill
Steel and aluminum panels carry recycled content and recycle again at end of life — unlike every torn-off shingle.
Standing Seam or Exposed Fastener?
Standing seam is the premium system: panels lock together over concealed clips, so no fastener ever sees weather and the panels can expand and contract freely. It's what we recommend for homes — the roof you install once and stop thinking about. Exposed-fastener panels cost meaningfully less and suit shops, outbuildings, and budget-driven projects; the honest trade is the gasketed screws, which want a check-and-snug cycle over the decades.
Either way, gauge, finish, and underlayment matter more than brochures admit — and metal is unforgiving of sloppy flashing, which is why the installer question matters more with metal than with any shingle.
Sourced From Northwest Mills
We source panels from the region's own manufacturers — Taylor Metal and Nu-Ray Metals — which means short lead times, custom-length panels rolled to your roof's exact dimensions, and matching flashings bent by the same mill. When a panel needs replacing in fifteen years, the profile still exists an hour's drive away.
Weighing metal against shingles? The honest comparison lives on our shingle page — metal costs roughly twice as much installed and lasts more than twice as long. On exposed coastal sites and homes under heavy conifers, it's usually the better long-term buy.
Metal Roofing Questions, Answered Straight
Metal Roofing Across Five Counties
From the Canadian border to north Seattle, plus the San Juans by ferry from Anacortes — these cities and surrounding areas. Pick your city for local project photos, permit notes, and reviews.
The Last Roof You Put on the House
A free estimate with profiles, gauges, and colors from Northwest mills — quoted honestly against a shingle roof.
